New Items

High strength epoxy concrete Uses For fast and permanent reinstatement of concrete, particularly where high strength, abrasion, impact and chemical resistance are required. The product is designed for horizontal applications. It is ideally suited for reinstatement of defective concrete surface in bridges, dams, foundations, slabs, joints in highways, concrete runways and for use as a bedding material. Advantages  Solvent free  Dimensionally stable hardening  High compressive and abrasion strengths  Curing unaffected by humidity  Suitable for both damp and dry surfaces  Rapid hardening at low temperatures  Impact resistant Description Expocrete EC is a solvent free, epoxy based repair concrete, which is supplied as three component system and the coarse aggregate in the ratio recommended to be added at site. Technical support The company provides a technical advisory service supported by a team of specialists in the fi eld. 

Water dispersed epoxy floor coating and sealer Uses Nitofl or EPW100 fl oor coating provides a pigmented sealing coat onto cementitious and concrete surfaces providing dustproof, easily cleanable and resistant to penetration of oils and liquids. The cured fi lm is resistant to corrosion, chemicals and abrasion. Suitable for application in breweries, dairies, kitchens and food processing plants. The cured fi lm forms a waterproof barrier and is non-toxic. Advantages  Improves the resistance of fl oors to many industrial chemicals.  Hygienic - easily cleaned due to impervious fi nish.  Odour free - environmental friendly.  Water based - Zero VOC  Economic and easy to apply.  Attractive - available in a range of colours.  Antifungal - resistant to fungal attack. Description Nitofl or EPW100 is a three component prepacked, water dispersed epoxy resin system supplied ready for onsite mixing and use. The cured fi lm forms a hard, fl exible, matt seal to concrete and other substrates

Auramix 201 is a high performance super plasticizer suitable for low and high grade concrete and intended for applications where high water reduction and long workability retentions are required Auramix 201 developed to use in:   Long workability retention concrete.  Pumpable concrete High performance concrete Wide range of concrete grade ranging from M15 to M40 Advantages  Low viscosity admixture suitable for pumping different grades of concrete to greater heights.  Suitable for concrete having cement replacements and low water cement ratio.  Provides higher strength without increase in cement content or reduction in workability.  Reduce rate of workability loss normally associated with super plasticiser. Reduces shrinkage cracking because of lower water cement ratio. Makes the concrete water impermeable.

Concrete remover, cleaning and etching agent page 1 of 2 Fosroc Acid Etch Uses For the removal of mortar and plaster runs, droppings and stains from brickwork and concrete surfaces. Also for removal of hardened concrete from tools, machinery and equipment, or rust and mill scale from steelwork. Advantages  Rapid concrete etching action  No corrosive action with glass, plastic, rubber and most base metals  Cleans hardened concrete from tools and mechanical equipmen

Geo-Proof Multi-Application Waterproofing Membraneis an innovative waterproofing membrane that is madeup of thermally bonded three layers. The middle layer iscomposed of impervious flexible composite plasticpolymer, while the top and bottom layers areconstructed of specifically crafted fibrous non-wovenfabric. This element makes it a unique multi-applicationwaterproofing membrane. This membrane's uniquefeature is that it may be utilised for a variety ofwaterproofing applications in building construction,including foundations to overhead water tanks.It is a single product that can be used for practically allwaterproofing applications. It is also very quick andsimple to apply and is most cost effective waterproofingsolution for all kinds of waterproofing that provides100% waterproofing and great durability. Applying itonly requires three easy steps: cleaning the surface,using a high-quality cement base adhesive, and placingthe membrane on top of it while exerting roll pressure.

Uses To Improve the quality and long term durability of concrete exposed to severe weathering conditions. It Increases the resistance of concrete to damage by sea water, frost and de-icing salts and also makes concrete structures less prone to cracking. Reduces the permeability of low cement content concrete for mass pours such as dams and breakwaters. Improves the cohesion and workability of concrete where poorly graded or harsh sands and aggregates have to be used and minimises bleeding. As an ideal pumping aid to maintain cohesiveness and to minimise segregation where concrete is placed mechanically This admixture can be used in road kerb concrete.

Advanced low viscosity Super plasticiser, based on Polycarboxylic technology for Precast Concrete. Uses Auracast 100 is a high performance precast super plasticiser intended for applications where reduction in cycle time and early strength are required, and it has been developed for use in:  Precast concrete elements like Hollow core slabs Block, Cement Tiles ,Kerbstones , Edgings ,other items for garden landscape design ,Building blocks , bricks etc  Concrete requiring high early strength without steam curing  High performance concrete Advantages  Low viscosity admixture suitable for precast elements Suitable for concrete having cement replacements and low water cement ratio. Provides high early strength without increase in cement content or reduction in workability. Ideal for precast concrete production Early de-shuttering will result in increased productivity. Improves surface fi nish Minimizes damage due to early handling Better resistance to Carbonation. Reduces Shrinkage and Creep Reduces effl orescence

SikaControl® WT-200 P (IN) WATER RESISTING AND CRYSTALLINE WATERPROOFING CONCRETE ADMIXTURE DESCRIPTION SikaControl® WT-200 P (IN) is a combined water resisting and crystalline water proofing admixture used to reduce permeability of concrete and has the ability to heal the cracks. USES SikaControl® WT-200 P (IN) has been specifically formulated to produce high quality waterproof concrete. SikaControl® WT-200 P (IN) can be used in any below/ in / above ground watertight structures such as: ▪ Tunnels ▪ Subway Stations ▪ Bridges ▪ Water tanks ▪ Dams & Reservoirs ▪ Water treatment plants ▪ Basements ▪ Foundations CHARACTERISTICS / ADVANTAGES SikaControl® WT-200 P (IN) reduces ability of concrete to conduct water flow. It has unique active chemicals, which react with the moisture within the concrete and with various products of the cement hydration process. As a result of this reaction insoluble crystalline compounds are created throughout the entire capillary system. Over time crystalline formations reduce the size of the capillary pores until they are completely blocked and water flow is stopped. SikaControl® WT-200 P (IN) in water tight concrete application can result in: Uniform water proofing throughout the entire concrete volume ▪ ▪ No leakage due to surface damage ▪ Reduced water penetration under pressure ▪ Enhancement of self-healing properties of concrete

Water insensitive epoxy material Uses For use in grouting gaps ranging from 0.25mm to 10mm as an epoxy injection material. As an underwater epoxy fi llerised grout in conjunction with quartz fi ller. As an underwater epoxy repair mortar in conjunction with quartz fi ller. Advantages  Water insensitive. Can be applied under water  Low creep characteristics  High compressive, tensile and fl exural strengths Fast, convenient pumping with early strength gain Withstands a wide range of chemicals Description Conbextra EUW is a two part , low viscous epoxy resin system consisting of a water insensitive base and hardener. Technical support Fosroc offers technical support service to specifi ers, endusers and contractors, as well as on-site technical assistance in locations all over the country.

Auramix BCI is used as corrosion inhibiting admixture for all reinforced concrete and not limited to Below ground structure such as Pile, pile cap, mat foundation where chloride threshold value is more in the soil.  Bridges and fl yovers Structures in coastal areas and submerged conditions Power plants Steel plants High rise buildings Structures in sea water Pre-cast Elements Tunnels and underground structure

High performance, cross linked, closed cell, non-absorbent, polyethylene joint fi ller Uses Hydrocell XL is a cross linked, non absorbent, semi-rigid, cellular polyethylene joint fi ller used for forming expansion joints in concrete, brickwork and blockwork. The product provides excellent support to sealants subject to hydrostatic pressure and is particularly recommended for water retaining or water excluding structures. Hydrocell XL is a high-performance replacement for traditional sponge rubber (ASTM D1752, type 1) and cork (ASTM D1752, type 2) joint fi llers. Advantages  Cross linked to resist lateral and hydrostatic pressure  High density support of sealant to prevent adhesion failure  Non absorbent closed cell structure  High compression recovery  Non-extruding  Low load transfer to joint edges  Non tainting  Chemically resistant  Natural bond breaker  Rot proof Standards compliance Water Authorities Association, Civil Engineering Spec. for the Water Industry, 4th Edition Clause 2.124. UK WFBS listed product – suitable for use in contact with potable water. Listing number 9308528. DTp Specifi cation for Highway Works, Dec 1991, Series 1000 clause 1015. Exceeds the performance requirements of ASTM D1752-84 and AASHTO M153-92 for recovery and extrusion.

Free fl ow, High strength, Non Shrink, Sulphate resistant cementitious precision grout Uses Conbextra BB92-O is designed for precision grouting of foundations subjected to static & Dynamic Loads. Product is specifi cally suitable for grouting base frame of steel wind turbine tower and also Horizontal & Vertical joints of Precast concrete wind turbine towers. Product can also be suitable for situations where sulphate resistance is a critical function. Advantages  High early & Ultimate compressive strength  Excellent fl ow characteristics and rheology permits pumping  Dynamic Load resistant  Non Shrink  Prepacked material overcomes onsite batching variations Description Conbextra BB92-O is supplied as ready to use dry powder which is blend of Portland cement, graded fi llers and chemical additives which impart controlled expansion in plastic state while minimising water demand. The addition of a controlled amount of clean water produces a Free fl owing, non shrink grout with high early & ultimate strength. The mixed material is suitable for grouting gaps ranging from 10 - 150 mm thickness

PRODUCT DATA SHEET SikaRep® Microcrete-3 UW ANTI-WASHOUT, NON-SHRINK, HIGH STRENGTH CEMENTITIOUS MICRO-CONCRETE FOR UNDERWATER REPAIRS DESCRIPTION SikaRep® Microcrete-3 UW is a factory design, pourable/ pumpable, non-shrink anti-wash repair concrete with selected cement, aggregate and other chemicals. Recommended water only to be added at site. USES SikaRep® Microcrete-3 UW is mainly recommended for the repair of damaged concrete structures for damp wet and submerged condition. ▪ Bridge Columns ▪ Pier ▪ Pile caps ▪ Quay Pillars ▪ Retaining wall in splash zone / submerged condition ▪ It is also recommended for grouting of large gaps For larger pockets of voids SikaRep® Microcrete-3 UW can be added with 8 mm down aggregate in the ratio of 2:1 CHARACTERISTICS / ADVANTAGES SikaRep® Microcrete-3 UW has the following advantages : ▪ Shrinkage compensation ▪ Anti wash property ▪ Low porosity ▪ High bond strength ▪ High early strength ▪ Chloride free ▪ Durability PRODUCT INFORMATION Packaging 30 kg bag Appearance / Colour Grey powder Shelf Life 6 months from date of production if stored properly in undamaged and unopened, original sealed packaging. Storage Conditions ▪ In dry conditions at temperatures between +5°C and +40°C. ▪ Protect from moisture, direct sunlight and frost. Bulk Density ~1.30 kg/l at 27 ºC pH-Value 11 - 13.5 when mixed with water (ready to pour)

Cementitious repair system for concrete fl oors Uses For patching and replacement of worn out areas, fi lling of holes or depressions in concrete fl oor slabs in factories, godowns, commercial or domestic buildings. Advantages  High strength : Nearly three times harder than the normal concrete  Non shrink - Eliminates shrinkage problems associated with conventional cement concrete / mortars and ensures effective bonding.  Reliability : Factory controlled prepacked product eliminates material selection, quality control and other associated problems on site.  Durability : Very high ultimate strengths combined with a uniform microcellular material structure provides heavy duty performance and durability.  Early usage : Floor usable in 24 hours for light traffi c and in 72 hours for all traffi c.  Iron free, chloride free : No metallic iron present to corrode and cause staining or deterioration due to rust expansion. Allows early strength development without the use of chlorides. Description Superpatch mortar is supplied as a ready to use dry powder requiring only the addition of water to produce a high strength mortar with non shrink property. The material is a mixture of specially processed cement and carefully graded fi ne aggregate. Additives impart controlled expansion characteristics and reduce water necessary to produce cohesive mortar mix. The very low water/powder ratio ( 0.14) ensures high early and ultimate strengths. For repairing thick sections of more than 25mm depth it is necessary to use well graded aggregates ( machine crushed, washed and cleaned) in the size range of 3mm to 10mm. Quantity of aggregates should not exceed 1 part of graded aggregate to 1 part of Superpatch by weight in which case the water/powder ratio will need to be increased to 0.18.

High Quality Micro Silica for concrete Uses Conplast MS micro silica is primarily used to improve the properties of hardened concrete where a reduction in permeability, increased durability and resistance to chlorides, sulphates, abrasion, frost attack and alkali silica reaction are required. Advantages Signifi cantly reduces permeability by minimising the penetration of moisture and aggressive elements  Signifi cant reduction in chloride ion penetration by reducing continuous capillary pores  Improved mechanical properties

Auramix 500 is a high performance superplasticiser intended for ultra-high strength concrete having very low water cement ratio and long workability retention are required, and it has been developed for use in:  Self-compacting concrete,  Pumped concrete to greater heights  Concrete requiring long workability retention For Ultra High Strength Concrete  High performance concrete. Slender structural sections

High performance high strength, carbon fi bre system for structural strengthening Uses Nitowrap EP(CF) is a carbon fibre composite system for strengthening columns, beams and slabs of load bearing structures particularly where improvement to shear strength and deformation characteristics is required. It is ideal for seismic retrofi tting also. Typical applications include piers, columns, beams, slabs, retaining walls, masonry bridges, pipes, chimneys, tunnels and other structures. Advantages  Very high strength to thickness or weight ratio - Appreciable increase in strength and load carrying capacity without signifi cant increase in dead load  Enhanced stiffness, shear & tensile capacities - Increased load carrying capacity and better resistance to seismic forces and defl ection.  Chemical resistant – Excellent resistance to acids and alkalis  Flexible- Can be applied on any shape or contour of substrate  Thin sections - Can be effectively used in space- constrained areas.  Creep & Fatigue resistance - Ideal for conditions of sustained loading and repeated loading.  Economical- Easy to install, time & labour saving Description Nitowrap EP(CF) is a carbon fi bre composite wrapping system where Nitowrap EP(CF) is used in conjunction with an epoxy sealer cum primer, Nitowrap 30 and a high build epoxy saturant Nitowrap 410. The system is protected by a polyurethane top coat of Nitowrap 512 in case of atmospherically exposed structures.