Dolfin Global Projects Private Limited

Sika Anchorfix-3030 is adhesive a high-performance, two-part, epoxy-based chemical anchoring designed for anchoring threaded rods and reinforcing bars in concrete and masonry. It is characterized by its high load capacity, long open time, suitability for seismic applications (C1 & C2), use in damp concrete, and approval for contact with drinking water. The adhesive is applied using a standard sealant gun and is suitable for structural work, rebar, bolts, metalwork, handrails, and window and door frames, among other Applications.

 

PRODUCT DATA SHEET Sikadur®-31 SBA S-02 IN Segmental bridge adhesive for use at +25 °C to +45 °C DESCRIPTION Sikadur®-31 SBA S-02 IN is a 2-part epoxy based moisture tolerant, thixotropic, solvent-free, structural adhesive especially formulated for segmental bridge construction. It has good squeezability, high initial strength gain, hardens without shrinkage and complies with many international and national standards such as FIP, ASTM etc. Application temperature range +25 °C to +45 °C. USES Sikadur®-31 SBA S-02 IN may only be used by experienced professionals. Sikadur®-31 SBA S-02 IN is used as segmental bridge adhesive for use on substrate temperatures of +25 °C to +45 °C. Sikadur®-31 SBA S-02 IN in segmental bridge construction: ▪ Provides a watertight joint between segments ▪ Lubricates the surfaces ▪ Transfers the loading stresses between segments CHARACTERISTICS / ADVANTAGES Meets and / or exceeds International and National Standards (such as FIP, BS, ASTM etc.) ▪ Lubricates the surfaces and makes positioning of the shear keys easier ▪ ▪ High strength and high modulus of elasticity ▪ High initial and ultimate strengths ▪ Impermeable to liquids and water vapour ▪ Minimal water absorption Suitable for dry and damp concrete surfaces (moisture tolerant) ▪ ▪ Hardening is not affected by humidity Thixotropic: non-sag in vertical and overhead applications ▪ ▪ Solvent free ▪ Hardens without shrinkage ▪ Different coloured components (for mixing control) ▪ No primer needed APPROVALS / STANDARDS Test report on Sikadur®-31 SBA S-02 IN, Bureau Veritas (India) Pvt Ltd, February 2018

PRODUCT DATA SHEET Sikadur®-53 (UF) MOISTURE INSENSITIVE INJECTION RESIN. DESCRIPTION Sikadur®-53 (UF) is a solvent-free, two part, moisture insensitive liquid, based on epoxy resin. USES Sikadur®-53 (UF) may only be used by experienced professionals. Sikadur®-53 (UF) is used as an injectable resin to seal damp, wet and submerged cracks by high pressure injection ▪ For adhesion of concrete and steel in damp and wet condition (by water displacement) ▪ CHARACTERISTICS / ADVANTAGES ▪ Cures without shrinkage High resistance to a wide range of aggressive chemicals ▪ Excellent adhesion to salt-water immersed, cement bound substrates ▪ ▪ High density ensures complete water displacement High mechanical strengths even after hardening under water